I’d like to give you a feedback for the bulletfeeder:
Got the bulletfeeder and i am very happy with it. It was very easy to set up and works perfectly. I am using it with a Dillon Super 1050 using 9mm bullets 124/145 grs Fiocchi. I can’t think of any improvements you could make i just found it wonderful.
The video with the instructions was also very helpful.
—
Rick,
Actually I got the equipment Saturday, and had it set up in less than an hour. I have to commend you on several levels. First, the feeder worked flawlessly without any adjustment at all. And it just keeps on working. What a superior design. What a delight to use. Second, the instructions are clear, concise, and consist of good English. The photographs could not be better, and make this equipment a piece of cake to install. Every time I walk by my reloading bench, I have to smile. Anybody wants to know how your equipment works, have them send me an e-mail (kaos@ucsd.edu).
I can’t thank you enough,
Regards, Chuck
—
I bought your complete system and it is great. One of the best purchases I have made for reloading. I have a Dillon 650XL and load 9mm major for my open gun. I also want to load 9mm for my 3gun XD. I use the same MG 124gr. JHP for both firearms. I have the complete head assembly w/dies and powder measurer for the different load and bullet length so I can make a quick change. I would also like to quick change the Bullet Feeder rather than unscrew the feeder and adjust it each time. What parts do I need to be able to make the quick change?
Thank you
Neil Erasmus
—
Hi Rick, My machine came in today and I had it running perfectly right off the bat. Just love it. You’re not kidding about readjusting the powder funnel higher than the Dillon funnel. I had to go way up for the 40sw. Have it set at about .421 and the bullets slide right in and don’t come off while indexing. I can’t think of any questions as the directions are done very well.
Thanks, Bill Cone
—
Hey Rick, got the bullet feeder on last night and pumped out a ton of rounds, love the new tool and had no issues with bullet seating.
Thank You Very Much,
Darren Sucato
—
Good Morning Rick – I received my Mr. Bulletfeeder from from here: http://www.doublealpha.biz/bulletfeeder/mr-bulletfeeder a few days ago. Got it mounted on my 1050 and loaded about 6000 9mm without a hic-up, I think I had one upside down bullet . Great design and it works as everyone said it does. I hope you have a great day and Happy Holiday season.
Loy Harris
—
Rick,
As soon as I got home I set the bulletfeeder up which, thanks to you taking the time to show me the finer points of assembly, only took a few minutes. I loaded up 500 9mm rounds for tonight’s “Tuesday night steel” and was off. Everything worked like a champ and wow, it was fast. Thank you again for a wonderful product… it was worth the wait.
Sincerely,
Chris
—
Hi Rick, as per our conversation on the phone last night I received my bullet feeder. I had a chance to load a few 9mm last night and all I can say is WOW this machine rocks!!!! I like it way better than my Hornady bullet feeder so far…Thanks so much for sending it to me…Keep up the good work… 🙂
Talk to you soon
Dan Hennessey
—
Rick,
Bulletfeeder arrived. I found it easy to install, adjust (I used your case expander in the powder die) & it works like a dream! Thanks for making a great product!
Bonnie
—
Dear Rick,
You are overwhelmed with orders because you product works!
Thanks for your help.
Brendan Manning
—
Being a small commercial reloader, I don’t have a lot of extra money to throw around on equipment that doesn’t work. If it costs me more time to tinker with it, then it costs me money.
I needed a bulletfeeder that would work with my Dillon reloading equipment and took months to study all the units on the market. I bought the Mr. Bulletfeeder® unit and could not be happier.
To be blunt, it works, and works well. If you take the time to read the well thought out and illustrated instructions, you will find that you will be loading ammo in no time with the Mr.Bulletfeeder® unit and just being amazed at how you got along without it.
Rick is a good person to work with, with great service after the sale. After I bought the .223 bullet unit and had a couple of questions ( that were answered in the manual….) he called several days later to check in on me to make sure I was getting along OK…..You don’t get that kind of service any more.
Give Mr.Bulletfeeder® a try and you will take your enjoyment of reloading to a new level.
Doug Carden, Owner
DC Ammo, Inc.
—
Rick,
Got the feeder it’s installed adjusted and running like a champ I like the new style a lot more 🙂 …..thank you,
Daniel
—
Hi Rick,
I received the bulletfeeder last night and set it up on my 650, made all the adjustments as explained in the instructions, I loaded 400 rounds without a hitch your product is excellent! it was nice dealing with you. I would recommend you to anyone.
thank you. Leo
Rick: Well, I have loaded a couple of thousand rounds of 9mm so far and your bullet feeder works like a charm. Just thought I would let you know. I appreciate your good work.
Thanks,
Eric Davis
—
Rick
thank you again for the bulletfeeder! this thing is a dream and i wanted to let you know that by following your instructions, i was able to set it up in a little under half an hour including swapping out my powder drop and readjusting the powder die. Heres my video i put up on youtube and loading ammo for the Golden Bullet sectional match was a breeze!! I can not express how happy of a customer i am and my only regret is that i ordered this thing sooner.
http://www.youtube.com/user/djsirloki#p/u/10/LgHmxxOMPs4
one question i had was i also load 38 super and was wondering if you sold the dropper die separately as I do have a quick change for my super load and would love to use the bullet feeder with my super toolhead. Let me know!
thank you again!
Brian
—
Hi Rick – was travelling last week and did not get back until early this week, just had a chance to unpack and set it up. MAN, cannot believe I actually loaded .223 without this! Got everything dialed in, loaded 800 rounds in the first sitting. Really amazing what a difference this makes, thanks very much!!
Jared
—
Hello Rick,
I now have over a half a million rounds loaded using one of your bullet feeders.
Thanks!
Richard Zapperoli
Dallas Reloading Supply
—
Thanks Rick…
FYI…I tried a GSI bullet feeder…way too finicky… All my buddies up here have one of yours and they swear by them
Can’t wait to try it out.
Cheers
Craig
—
Hi Rick I have got it up and running I have had a few problems with the press but not with the bulletfeeder. It was very straight forward and easy to set up your instructions were comprehensive and easy to follow. I have had problems with the primers going into the brass sideways but I think it is sorted out now. When it is 100% I will demonstrate the bulleteeder to some friends so hopefully it will lead to more customers. It is easy to use and will compliment my 650 nicely.
Thanks again,
Gordon
—
Rick,
I’ve loaded over 2000 rds since I received the bullet-feeder. I love It.
I have already recommended it to many of my fellow shooters.
Thanks,
Robert Brock
—
Rick
I have received and setup the bullet feeder. This is the next best thing to the Dillon 650 only because I have to have the press to have the bullet feeder. I am thoroughly pleased with it.
I have screwed up hands from an accident, and I had trouble putting bullets on the cases. I tried another bullet feeder, but it was worthless. If my press and case feeder worked as well as your bullet feeder reloading would be boring. You have a great product, and I look forward to adding more of your products to my loading bench.
Thanks Rick!
Lynn C.
—
Rick,
We liked the 223 bulletfeeder we bought from you back several months ago.
works real well with the ponsness-warren automatic drive unit.
ordered a GSI for the 9mm machine and it just never worked good consistently. way too complicated, and prone to cause machine lockups. another case of great sales pitch, and too complicated engineering. Worst thing was we saw it run at the SHOT show last year, and it
ran just fine there. had them send up replacement parts, we spent probably 80 hours of time getting it set up, taking it apart, oiling, greating, cleaning, and just tinkering with it.
We had your bulletfeeder running in full production in under 3 hours (we had to set the dies for the 1050, or it would have been under an hour)
We’re going to deep 6 the GSI unit, and I need a 9mm bulletfeeder pretty quick.
Any chance I can get one shipped to me next week ? 😉
Sincerely,
Clarke Coulter
—
I received one of your feeders the other day and got it working today. I am absolutely amazed at how well it works after a small ordeal with GSI unit. We timed the load rate at 2000 an hour if we could keep primer tube filled. So thank you and if you ever need a reference for a customer please have them call or email me.
Thanks again,
Phil Racey.
—
Rick
Installed my “Mr Bullet Feeder” Saturday after returning from the range, it took all of abort 20 minutes. Guess what it, it worked flawlessly right out of the box, set the dropper the way you recommended, no other adjustments required. Did not use your expander tool, instead just increased the flair a whisker and it worked perfectly.
Figured out what to do with my left hand, I use it a brake to stop the cases smoothly. Yesterday I loaded 400 rounds faster than I have ever done.
Excellent job!
Thanks again for your help, will do what I can to spread the word.
Grant Jeavons
—
Hi Rick,
I installed the 38 plate yesterday and………. IT ROCKS!!!!!!
It is incredibly faster to feed bullets in comparison to the old plate – GREAT UPGRADE!!
I have loaded one scary HUGE pile of 38 Super Comp rounds though – and it has worked flawlessly!
Michael Voigt
—
Man this thing is AWESOME with a capital A. Why didn’t I buy one of these sooner ? Oh yea, the price tag. Well having successfully negotiated a raise for myself at work recently, I felt obligated to splurge just a little bit on myself, and what better way ? I love it. In fact I’m thinking of chopping off my left arm since I’ll never need it again. Just kidding …… but Hey I would have a distinct advantage on all the “weak-hand” stages ….. ha-ha (again just kidding)
Seriously though thanks for a great product and great customer service.
Sincerely,
Chris Keen
—
Rick – You’ve made a believer out of me. The bulletfeeder is flawless. You’ve done your homework and manufactured a great machine. All the testimonials that I have read about the bulletfeeder set up and operation are absolutely correct. From ease of set up, to ease of operation and simplicity. Being the lazy individual that I am, however, I’m only angry at myself for not stepping up and buying the machine sooner. Reloading is no longer a chore. Though I shoot fewer .40 and .45 than I do with the .38 super, which the machine is currently set up for, now I’ve sold myself on needing to get the conversion kits for the other two calibers. If there is any doubt in anyone’s mind about needing this machine, then they should think back about how they felt when the moved up from the Square Deal to the 650 and then the 1050. Each succession of loader made life so much better. Your bullet feeder elicits the same satisfaction.
Stephen G. Leach
—
I should have written this months ago. I’ve been up to my eyeballs with gunsmithing and moving but I should have taken a few minutes to let you know how much I am enjoying your bulletfeeder. My left thumb is so happy these days now that I have your unit on my Dillon 1050. I no longer get that cramping feeling in my thumb from reloading.
I’m amazed at how fast this product of yours has made my reloading. I now have more time to get the gun work done now that I do not have to use so much time to load ammo. There have been times when I didn’t go practice because my ammo wasn’t loaded, but not now. This feeder is exactly as you said it would be, RELIABLE and FAST. The set up is so simple a cave man can do it! This is a quality unit like the Dillon Press it’s attached to. You WILL NOT BE DISSATISFIED with this unit. Thank you for a product that truly lives up to what you said.
Frank Glenn
—
Rick,
Just wanted you to know how great the feeder is. This thing worked great out of the box and continues to just run and run. Its sure nice to buy something for a change and have it work perfect right out of the box!! FYI set up time was about 20 min. I have run 4 different style 9mm bullets in it and its not picky at all it just works.
Thanks,
Brian Williamson
—
Dear Sirs,
I am writing this letter to let you know how pleased I am with your new Bulletfeeder. Having loaded over 10,000 rounds so far in both 38 super and .40 caliber I can truly state that you have, no doubt, come up with the best innovation in personal reloading to date.
I have been involved in IPSC and USPSA competition for almost 30 years and have been exposed to every type of reloading equipment that has come along since the late 70’s. Single stage, Turret, In line progressive, and Progressive. I currently use the Dillon Super 1050 and reload about 3000 rounds per month.
Once I experienced the 1050 I thought I was in reloader’s heaven. That is until I purchased and installed your new product. It didn’t take long for me to achieve a consistent loading rate of 1600 rounds per hour. That’s without pushing it. Sometimes I try to beat my Dillon Automatic primer filler, but not quite. In a test for speed I was able to load 500 rounds in 15 minutes.
The best part of this situation is that I can spend less time loading and more time on the range practicing.
Thanks for your ingenuity,
Joe Platt